為了更好地保證陶瓷棉板產品質量,以達到應盡的使用效果,本廠對陶瓷棉板產品的安裝和施工特制定如下條例:
對于要求施工的表面應先進行除銹、除油、除污的工作,使其盡量保持干凈和整潔。
在對要求施工的鋼板表面,焊上相應數量的碰釘,碰釘長度一般需超出陶瓷棉板產品總厚的20mm-30mm,碰釘的數量一般每平方米不得少于16只,必須達到陶瓷棉板產品上在鋼板上的牢固性。
產品在開箱之前應根據船舶設計部門所設計要求的容量和規格,使之相符合,然后再開箱,將產品輕輕拿出展平。
陶瓷棉板應平整,均勻地放置在已焊上碰釘的鋼板上,使碰釘穿過棉板的表面20mm-30mm,同時兩塊陶瓷棉板之間應靠緊,使之縫道小。對于有二層以上的施工,應將上下兩層的陶瓷棉板的縫道錯開,以達保溫吸音效果。然后用鎖緊壓片,鎖緊壓平。碰釘露出鎖壓片部分,可根據空間距離,選擇向邊彎曲或壓平,然后進行后續裝飾面板的安裝。
為了達到完美的施工效果,在施工中對于需要裁剪的陶瓷棉板產品應做到裁剪行直、平整、對于裸露的地方,應重新用阻燃膠水將玻璃絲布粘貼,對于兩塊陶瓷棉板之間的縫道也應用阻燃膠水將玻璃絲布粘貼住,以達到施工效果的平整、美觀和完整性。
In order to better ensure the ceramic fiber board product quality, in order to reach should try using effect, the factory of ceramic fiber board product installation and construction specially make the following regulations:
For the requirements of the construction of surface shall be rust, degreasing, cleaning work, so try to keep it clean and tidy.
On the requirements of the construction of the plate surface, welding a corresponding number of touch nails, nail length generally touch beyond ceramic cotton board product total thickness of 20mm-30mm, touch nails volume is average every square metre of not less than 16, to reach the ceramic fiber board products on the steel firm.
Products in the box before the ship design department should be based on the design requirements and specifications capacity, making the match, and then out of the box, products will be gently pulled out flattening.
Ceramic fiber board should be flat, evenly placed in welding touch the nail plate, so that the touch nails through the cotton plate surface 20mm-30mm, while two ceramic cotton board should close the gap, minimum. For more than two layers of construction, should be the upper and the lower two layers of ceramic fiber board seam stagger, so as to achieve the optimum insulation sound-absorbing effect. Then use the lock cover, locking out. Touch the nail with lock pressing part, according to the space distance, chose to side bending or pressing, and then follow-up decorative panel installation.
In order to achieve perfect construction effect, in the construction of the need for cutting ceramic fiber board product should be cut line straight, smooth, the exposed areas, should be flame-retardant glue glass cloth paste, for two pieces of ceramic fiber board between the seam and application of flame retardant glass cloth paste glue will live, in order to achieve the construction effect of smooth, beautiful and integrity.